Types of Exterior Concrete Paints

‘Primer-Sealer + Paint + Gloss’ Combination
This is actually the conventional technique of painting a concrete surface. For this function, you should use oil based or latex exterior masonry paint. Both perform decent job. In this conventional way of painting, initially you will need to prepare the top. Once the surface is ready, apply a sealer into it. Sealer is applied to any cracks, gaps or holes in the surface. Then uneven surfaces are sanded down. Then your surface is cleaned again. A coat of primer is applied to the counter, in order that the layer of paint adheres easier to the surface. After some time the coat of oil based paint or latex exterior masonry paint is applied.

Latex paints are water based paints while oil based paints are needless to say oil based. Latex paints are less costly because they are generally water based, the gear for painting can be cleaned easily with plain water. Also, they may be environment-safe in comparison to oil based paints. Oil based paints can be expensive as products are cleaned using a special solvent, however they have a tendency to get tougher than water based paints. When you have applied a coat of paint, you can apply an extra coat if you would like. After paint application is conducted apply an increased gloss finish for the surface. Glossy finish are tough finishes which is often scrubbed, causing them to be easy to clean. Also, they resist deterioration. However, their high shine appearance is undesirable to many homeowners.

Special Paints
Certain special paints are specifically made by remembering exterior concrete surfaces. With such sort of paints has benefits. These paints don’t require using primer, sealer or possibly a gloss finish. This can really save the painting duration and value. But, sometimes reapplications of such paints are required. Still, these paints are economical and time saving and are also better. Some paints are cement based paints, exterior aluminum paints or special latex paints.

One paint is Crete-Coat which is available in various colors, they have low sheen and resists development of mold or mildew. Generally, paint is placed on concrete after it’s fully cured. But, this paint might be placed onto fresh or fully cured concrete surfaces. However, it is shrewd to always prepare the concrete surface well prior to painting for any well finished splash of paint. Sherwin-Williams is yet another leading brand in relation to exterior tough paints. One product by them called as PORCH & FLOOR ENAMEL is great for painting patios as well as other exterior surfaces. Another manufacturer called Firwood has Firlex 94 paint which may be useful for both exterior are interior surface. This paint could be put on wood, steel and concrete. One particular coat of this paint is enough. They are all quality paints, however, if the place is often a high traffic region, then you certainly may require frequent reapplications.